Which Rack
for your gym?
Power Rack, Half Rack, folding rack or even a multi-station rig — plus all the accessories from dip bars to cable pulleys. This guide shows which setup fits your space and training.
Learn the barbell back squat: J-hooks, safeties and technique step by step
For classical strength training, this is R-SERIES Power Rack (CHF 490.-) the complete, secure base — supports up to 500 kg, with safety bars and pull-up bar. At limited space Does the foldable power rack fold down to a depth of 9 cm from the wall? Half Rack is the open, compact alternative. For several athletes There are rigs from 1 to 6 stations. And everything shares the same system: all R-SERIES accessories fit every rack and rig.
To the polls in 10 seconds
What describes you best?
The R-SERIES System
A perforated grid. Everything fits together.
Racks, rigs, and accessories of the R-SERIES share the same 26 mm hole pattern. That means: you buy a rack today and expand it over the years—dip bars, cable pulley, belt squat, storage. Nothing is a dead end, nothing gets replaced.
For whom, starting at what price / from what age
One system — for every setup
- Basis Half or Power Rack
- When space is limited: Foldable
- Introduction: from CHF 390.-
- Basis Wall-Mounted Rig
- 2 stations: from CHF 895.-
- Step by step expandable
- Basis Freestanding Rig
- 4 Stations: from CHF 1’590.-
- 6 stations: from CHF 2,490.-
- Basis Rack or Rig by room
- Planning: Personal consultation
- Also: Leasing available
Larger project? We provide personal consulting for studios and clubs — including Leasing and financing solutions.
The Racks in Detail
Three racks, three situations

R-SERIES Power Rack CHF 490.-
The complete, secure base. Four posts, adjustable safety bars that catch a failed repetition—this is how you can train squats and bench press heavily and alone. J-hooks and a pull-up bar are included, and with a dead weight of 90 kg, it stands solidly without being bolted down.
Ideal for: all those who train hard and heavy with the barbell over the long term — from basement gyms to commercial fitness centers.
View power rack

R-SERIES Foldable Power Rack CHF 390.-
Full rack, half room. Six pins out, rack folded against the wall—leaving a depth of 9 cm, and the garage is a garage again. Folded out, the massive construction with 75 mm uprights supports up to 400 kg. It is mounted to the wall.
Ideal for: Garages and multipurpose rooms where the rack should disappear after training.
View Foldable Rack
R-SERIES Half Rack CHF 390.-
The slim training station. Open design with full freedom of movement for squats, shoulder presses, and pull-ups — with the same 500 kg load capacity as the large power rack, but with a significantly smaller footprint.
Ideal for: compact home gyms that want a full-fledged squat and pull-up station without filling the room.
View Half Rack| Rack | Resilient | Dimensions (W×D×H) | Minimum height* | Assembly | Price |
|---|---|---|---|---|---|
| Power Rack | 500 kg | 152 × 133 × 214 cm | 215 cm | freestanding | CHF 490.- |
| Half Rack | 500 kg | 120 × 120 × 230 cm | 231 cm | freestanding | CHF 390.- |
| Foldable Rack | 400 kg | 123 × 70.5 × 231 cm folded: 9 cm deep | 237 cm | Wand | CHF 390.- |
* Minimum ceiling height = rack height plus 1 cm clearance. Important: That's not enough for pull-ups — your head needs to go over the bar. Depending on your height, plan for at least an extra 30–40 cm above the pull-up bar and measure carefully in the basement beforehand.
For multiple stations
Rigs: from 1 to 6 stations
As soon as multiple people are training at the same time—in a gym, club, or company—a rig is the more efficient solution: multiple squat and pull-up stations in a single structure. Wall-Mounted saves space and uses the wall as an anchor, Freestanding stands freely in the room. Both grow along with the same grid.
Wall-Mounted SingleCHF 445.- CHF 395.-1 Station
Wall-Mounted DoubleCHF 935.- CHF 895.-2 stations
Wall-Mounted TripleCHF 1,425.00 CHF 1,350.003 stations
Mini Rig for VOLTRACHF 175.-Cable machine
Freestanding DoubleCHF 840.- CHF 790.-2 stations
Freestanding FourCHF 1,730.- CHF 1,590.-4 stations
Freestanding SixCHF 2,490.-6 stations
Double incl. StorageCHF 2,470.-2 stations + storage
Wall Ball RigCHF 1,100.- CHF 990.-4 × Wall Ball
Ladder Functional RigCHF 2,470.- CHF 2,270.-4 × Functional
Kettlebell Storagefrom CHF 95.-
Dumbbell Storagefrom CHF 95.-
Plate Storagefrom CHF 95.-
Ball Storagefrom CHF 95.-
Components
Custom Rig: Uprights, crossmembers, and pull-up bars individually available — for custom configurations and future expansions.
- Main Upright Tube (Upright) from CHF 125.-
- Square Crossbar from CHF 45.-
- Pull-Up Bar from CHF 35.-
- Wall Fix CHF 25.-
- Front Foot Extension (Pair) CHF 95.-
- A-Hanger CHF 95.-
- Battle Rope Anchor CHF 19.-
Not sure which configuration fits your room? We are planning your rig with you — from the club room to the studio.
Upgrade instead of buying new
Accessories: Fits every rack & rig
All R-SERIES accessories fit all racks and rigs in the series. This is how a rack turns step by step into a complete training station — dips, rows, cable pulleys, belt squats. Sorted by function:
Safety Spotter ArmsCHF 135.-Catch the barbell
Belt Strap SafetiesCHF 120.-Joint-friendly emergency storage
J-Hooks barbell restsCHF 50.-Second pair / Replacement
Dip BarsCHF 95.-Dips at the rack
Landmine AttachmentCHF 45.00Rows & Presses
Single Pulley Cable MachineCHF 165.-Lat pulldown & Rowing
Lever Jammer ArmsCHF 250.-Guided push
Belt Squat AttachmentCHF 250.-Legs without back strain
Leg Roller AttachmentCHF 75.-Nordics & Fixation
Before buying
How to plan properly
Three numbers determine if your rack fits: Ceiling height, Base area and what additionally should go into the room. Measure before ordering — especially in the basement.
- Power Rack: min. 215 cm
- Foldable Rack: min. 237 cm
- For pull-ups: Allow space above the rod
- Power Rack: 152 × 133 cm
- Total training area: min. 2 × 2 m
- Side: Space for loading the bar
- Barbell + Weights: not included
- Below: 20 mm rubber flooring
- In addition: adjustable weight bench
Get started right away: The Bumper Plate Set + Olympic Bar (90 kg) delivers rod, washers, and closures in a set. The Adjustable Bench (up to 500 kg) fits in the rack, and the Connect+ Floor (20 mm) protects the subfloor and the neighbors' nerves.
Frequently Asked Questions
Rack Purchase: The Most Important Answers
Power Rack, Half Rack, or Foldable — what is the difference?
The Power Rack has four posts and safety bars that catch the barbell on a failed repetition — the safest choice for heavy training alone. The Half Rack is open and more compact, with the same 500 kg load capacity. The Foldable Rack is wall-mounted and folds down to a depth of 9 cm after training.
What is the difference between a rack and a rig?
A rack is a single training station for one person. A rig connects multiple squat and pull-up stations into a single structure — as Wall-Mounted Version on the wall or freestanding in the room. Rigs are worthwhile as soon as several people are training at the same time: in a gym, club, or corporate gym.
What ceiling height do I need?
The Power Rack is 214 cm high (recommended minimum ceiling height 215 cm), the Half Rack 230 cm, and the Foldable Rack 231 cm (minimum ceiling height 237 cm). Please note: These values only apply to setting it up. For pull-ups, you need significantly more—your head has to go over the bar, so depending on your height, you need at least 30–40 cm of clearance above the pull-up bar. In basements with low ceilings, measure carefully beforehand.
What is included in the delivery — do I need anything else?
All racks come with J-hooks for barbell storage, power and half racks additionally with a pull-up bar, and the power rack also with safety bars. Barbell and weights are not included — you add those separately, most easily with the Bumper Plate Set + Olympic Bar (90 kg) as a complete solution.
Does the accessory fit every rack?
Yes. R-SERIES racks, rigs, and accessories share the same 26 mm hole pattern — dip bars, landmines, cable pull attachments, belt squats, and all storage solutions fit every rack and rig in the series. This means you can start small and expand at any time without having to replace anything.
Do I need to bolt the rack to the floor?
The power rack stands stable on its own with a net weight of 90 kg; for tipping-stress exercises like pull-ups, however, we still recommend anchoring it. The foldable rack is attached to the wall due to its design. On sensitive flooring, it belongs Soil protection under the legs.
Does a weight bench fit in the rack?
Yes. The inside width of the power rack is sufficient for a flat or incline bench, allowing you to perform bench presses safely with the safety bars set. Well suited is the Adjustable Bench — load capacity up to 500 kg and adjustable.
Are the racks studio-grade?
Yes. The Power and Half Rack have a load capacity of up to 500 kg, are made of solid, powder-coated steel, and are designed for continuous use in a commercial environment. The same racks are found in studios and clubs — for the home gym, that means more capacity than you will ever need.
How fast is delivery — and how does the assembly work?
Racks und Zubehör sind an Lager in der Schweiz und in 1–3 Arbeitstagen bei dir. Geliefert wird zerlegt; mit üblichem Werkzeug ist der Aufbau gut machbar, zu zweit geht es wegen Gewicht und Höhe deutlich leichter. Für Rigs und grössere Projekte we will advise you personally.
Ready for your rack?
All racks, rigs, and all accessories are available ready to ship from our Swiss warehouse — plus personal consultation for studios, clubs, and larger setups.
View all Rigs & Racks



