Beyond Power | Voltra Nomad

New products: the VOLTRA I Cable Machine, the Strap Mount, the Travel Platform, six premium carabiners, Basic Handle, Functional Rope and CarbonFlex Bar 120 cm. Plus free aluminum SZ-grip and Rotation Row Handle. Individually CHF 3,464.-, in a bundle CHF 3,546.-.

That's right, this bundle comes completely without drilling, screws, and wall contact. Both attachments are tool-free: the Strap Mount is strapped around an existing structure, the Travel Platform stands freely on the floor. This makes NOMAD the only one of the three bundles that can be used in a rented apartment without consulting the management.

On practically any vertical, load-bearing structure: steel posts, balcony railings, rack uprights, pull-up bars, playground equipment, or trees. Included are two strap lengths of 0.5 and 1 m so you can enclose both thin and thick anchor points. The crucial factor is that the structure safely supports the tensile force of up to 90 kg — you must assess this on-site yourself.

The Travel Platform is a flat footplate with a non-slip surface and a mount for the VOLTRA I. You stand on it with both feet, your body weight anchors the plate to the ground, and the pull runs upward against you. This allows you to train anywhere there is no anchor point — right in the middle of your living room, in a hotel room, or out on the lawn.

All exercises that pull from the floor upward work well: curls, rows, upright rows, shoulder presses, deadlift variations, woodchops, and footwork. The limitation lies in the range of motion in the bottom position — for deep squats or Romanian deadlifts with a full stretch, the distance between the anchor point, device, and carabiner is not enough. For pulls from above, such as lat pulldowns, you need the strap mount at a high anchor point instead.

Yes, as long as there’s a high anchor point available. The Strap Mount can be attached to a pull-up bar, a door pull-up bar, a rack upright, or a tree branch; from there, you can do lat pulldowns, face pulls, and tricep presses. Without such a point, your workout is limited to pulls from the floor—that’s the only real trade-off this bundle has compared to a fixed station.

The entire set fits into a standard suitcase. The VOLTRA I weighs 5.8 kg and measures 32 × 14 × 10 cm; the Travel Platform has a carrying handle and is flat enough to fit in a 28″ checked bag. The Strap Mount and handles together weigh next to nothing. You don’t need any additional accessories to transport them in a car or to the studio.

The key factor is your installation situation. HOME: You have a sturdy wall, drill the holes yourself, and train at a fixed height. COMPLETE: You want a permanent workstation that's height-adjustable and fully equipped. NOMAD: Either you can't or don't want to drill, or you practice at different locations.

Yes, all Beyond Power mounts use the same mounting point on the VOLTRA I. If you decide later that you want a fixed position, you can add that DIY Dock with Base Plate for the wall or the Fixed Rack Mount for a rack. Strap Mount and Travel Platform can still be used at the same time.

Four handles cover the standard cable machine repertoire: Basic Handle for single-arm pulls and presses, Functional Rope for triceps, face pulls, and rotations, CarbonFlex Bar for two-handed pulls, aluminum EZ handle for curls and triceps pushdowns, rotation row handle for joint-friendly rowing.

No, and that's exactly what makes NOMAD location-independent. The VOLTRA I has a built-in battery and is charged via USB-C using the included 65W charger. You can use it to work out in the garden, in the park, or in a parking lot without needing to be near a power source.

No. The Beyond+ app can be used without a subscription; it counts repetitions, controls the modes, and provides strength and performance data. You can control the basic functions directly on the device’s touchscreen, even without a smartphone. There are no recurring fees.