Beyond Power | Voltra Complete

Ten positions: the VOLTRA I Cable Machine, the R-SERIES Mini Wall-Mounted Rig, the Sliding Rack Mount, six premium carabiners, Basic Handle, Functional Rope, CarbonFlex Bar 120 cm and Heavy-Duty Resistance Cord. Plus a free aluminum SZ-handle and Rotation Row Handle. Individually CHF 3,612.–, in a bundle CHF 3,512.–.

No. The R-SERIES Mini Wall-Mounted Rig is the training station and replaces the rack for this purpose. It is anchored to the wall and floor and supports the VOLTRA I over its full height. If you already own a power rack, you don't need this bundle — then the Sliding Rack Mount or the Fixed Rack Mount on your existing rack.

The rig is bolted to the wall at two points and additionally anchored to the floor — this dual anchorage is the reason for its high stability. Therefore, you need a load-bearing surface in both places, in practice concrete or masonry. Installation is not possible on a floating floor or a stud wall without reinforcement.

Yes, that's what the mini version is built for. The rig is 210 cm high, so you need a ceiling height of around 215 cm to set it up and anchor it. This means it fits in most basements, garages, and lower levels where a standard 240 cm rack no longer fits.

The rig protrudes only 37.5 cm into the room and is 7.5 cm wide—the footprint is minimal. The crucial factor is the training area in front of it: count on the cable length of 2.6 m as the operating radius, which practically means around 2 × 2 m of free space in front of the wall for pulls, rotations, and floor exercises.

Yes, that is the key difference from the HOME Bundle. The Sliding Rack Mount hangs the VOLTRA I on the upright and can be adjusted tool-free across the entire height of the rig—from low pulley work for leg exercises to overhead lat pull-downs. You can change the pull height between two exercises in seconds instead of needing a second mounting point.

The key factor is your installation situation. HOMEyou have a load-bearing wall, drill yourself, and train at a fixed height — cheapest entry point. COMPLETEyou want a permanent station with height adjustment and a full grip selection. NOMADyou don't want to drill or take the device with you.

Five handles cover the complete cable machine repertoire: basic handle for single-arm pulls and presses, functional rope for triceps, face pulls, and rotations, CarbonFlex Bar for two-handed pulls like rowing, aluminum EZ handle for curls and triceps pushdowns, rotation row handle for joint-friendly rowing.

The resistance cord is an elastic connector between the rope and the handle. It decouples the pull from the rigid cable, thereby allowing fast, explosive movements like jumps, throws, and sprint simulations without the rope braking harshly. You do not need it for pure strength training—but you do for speed strength and plyometrics.

Yes, the rig uses the uniform R-SERIES specification and can be combined with all attachments in the series. Commonly added are the Pull-Up Bar, the Battle Rope Anchor and the Kettlebell Storage. The Voltra Station is thus gradually turning into a fully-fledged training wall.

No. The VOLTRA I has an integrated battery and is charged via USB-C using the included 65W charger. During workouts, you don't need a wall power outlet — convenient if the station is in the basement or garage, where outlets are often not where you need them.

No. The Beyond+ app can be used without a subscription; it counts repetitions, controls the modes, and provides strength and performance data. You can control the basic functions directly on the device’s touchscreen, even without a smartphone. There are no recurring fees.